Accton Technology Fast EtherHub-12s Dokumentacja Pobierz pdf

EtherHub-16 Quick Start Guide

Smart Ethernet Hub with 16 RJ-45 Ports and 2 AUI/BNC Ports

This 10 Mbps Ethernet hub includes 16 RJ-45 ports on the front panel, and 2 AUI/BNC ports on

the rear panel. This hub can be operated in a stand-alone configuration, cascaded to other hubs,

or linked to one or more AUI/BNC backbones. This hub is suitable for desktop or rack-mount

installation, and supports full-range power input. The EtherHub-16 conforms to the IEEE 802.3

standard for local area networks based on CSMA/CD, and provides10BASE-T, 10BASE2 and

10BASE5 repeater functions including:

• Signal amplification and retiming

• Preamble regeneration and fragment extension

• Automatic port partition and reconnection

Hardware Installation

The EtherHub-16 has 16 RJ-45 ports, of which Port 16 can serve as either a standard port or a

daisy-chain port. It also has two AUI/BNC ports. Use twisted-pair cable (100W STP or UTP) to

connect any standard RJ-45 (MDI-X) port to a server/workstation, or to connect the RJ-45 daisy-

chain port (i.e., Port 16MDI ) to another compatible hub or switch. You can also attach up to two

Ethernet LAN backbones by connecting thin coaxial cable to a BNC port or connecting thick

coaxial cable to an AUI port.

Making RJ-45 Connections

1. Prepare straight-through twisted-pair cable (100W) with RJ-45 plugs at both ends. The

length of each cable should not exceed 100 meters (328 feet).

Do not plug a phone jack connector into any RJ-45 port. This may damage the hub. Instead,

use only twisted-pair cables with RJ-45 connectors that conform with FCC standards.

1 2 3 4 5 6 7 8 9 10

Podsumowanie treści

Strona 1 - Hardware Installation

EtherHub-16 Quick Start Guide1Smart Ethernet Hub with 16 RJ-45 Ports and 2 AUI/BNC PortsThis 10 Mbp

Strona 2 - MDI-X) port

EtherHub-16 Quick Start Guide10WarrantyAccton warrants to the original owner that the product delivered in this package will be free from defects inma

Strona 3 - System Configuration

EtherHub-16 Quick Start Guide22. If you are making a connection to an end-node device (e.g., a PC or server), be sure that it hasa properly installed

Strona 4 - Hardware Description

EtherHub-16 Quick Start Guide3Providing Power to the Hub1. Power on the hub by plugging the power cord into the power socket at the rear of the hub,a

Strona 5 - Troubleshooting

EtherHub-16 Quick Start Guide4Hardware DescriptionRJ-45 PortsThis hub has 16 RJ-45 ports that can be used to connect end-node devices (e.g., workstati

Strona 6 - Specifications

EtherHub-16 Quick Start Guide5AUI PortThis hub has two built-in AUI transceivers (i.e., AUI1 and AUI2) on the rear panel for connectionusing thick Eth

Strona 7 - EMI Warning

EtherHub-16 Quick Start Guide6Symptom: Jabber indicator lights up.Causes: Frame received on this port exceeds length threshold for Jabber Lockup Prot

Strona 8 - Safety Compliance

EtherHub-16 Quick Start Guide7EMI WarningFCC Class A CertificationThis device complies with Part 15 of the FCC Rules. Operation is subject to the foll

Strona 9

EtherHub-16 Quick Start Guide8You may find the following book prepared by the Federal Communication Commision helpful:The Interference HandbookThis bo

Strona 10

EtherHub-16 Quick Start Guide9Sicherheitshinweise1. Die Steckdose muß sich in der Nähe des Gerätes befinden und leicht zugänglich sein.2. Zum Reinig